Galleries

No galleries.

Member Galleries

No galleries.

Member Stories

2.3 Ford Four Cylinder info I know it's not period correct, but it's a pretty easy engine to use 'cause of availability. It's served me well. I decided to post my 2 cents here for everyone. I don't claim to be an expert, this is just what I've found/learned. I'll enjoy seeing other opinions and success stories. So here's what I'd look for or watch out for when using a 2.3: 1) DIS stuff, it means, NO DISTRIBUTOR! Unless you're going computer ...
More

Stories from MyRideisMe.com

See my Points - Pertronix Install Guide Customer service pays off. Or should I say, bad customer service doesn't pay. If you haven't seen my 1927 Ford Roadster called "Bonnie" then this may be your first time to MyRideisMe.com. In that case, WELCOME! Please stay a while and if you dig it... JOIN here. My roadster kinda odd because I run a 2.3L Ford Motor. That's right! It's a Pinto motor and I'm proud to be part of the 4 banger world. The 2.3's are ...
Pinto Power at it again! Hydroplane Racing It's no wonder there are a ton of 2.3 engines out there making power. They're one of the top engines for Ministock racing, we knew that, and there's a few companies making go-fast parts for them like Esslinger (http://esslingerengineering.com/) and Racer Walsh (http://racerwalsh.zoovy.com/). We've even got a near fanatical following for the turbo 2.3's over at turboford.org. But, I had no idea folks like Dennis Wright ...
MyRideisMe.com teamed with Dub Wheels Pimpstar In addition to the sleek new set of 26x10" wheels and tires from Dubs, I'll also be installing a new LT1 fuel injected crate motor to replace the pinto power! Check out these new rims! (They make spinners look like 13"Centerlines!) Gonna be ROLLIN baby!! go back Oh, and APRIL FOOLS! (did I get'cha? Please leave a comment) (MyRideisMe.com is not receiving advertising money from Dubs, I just thought this was ...
Finally Assembled! Pinto baby! I'm not sure when I started working on this project, but it was at least 4 years ago. I wanted to build a trick intake setup for my Pinto Powered Roadster called Bonnie. Bonnie's always turned heads, even parked next to MUCH higher dollar rods. I have to admit that I like that. The intake design is from a tech article I read from the Inglese website. It explains why individual runner intakes and weber carbs are the hot ...
Gearing up for Scottsdale Goodguys Show Some how while trying to make this website and taking care of my family, I'm also working on my Pinto Powered 27 Ford Roadster, "Bonnie". I thought I'd update everyone on the progress. I'm doing this so that all of the 230 users of My Ride is Me will do the same! We're talking to our web designer about how to show EVERYONE's blogs all in one place. That way, we can all keep up with what's new. First off, here's the ...
More