I can't let another day go by without sharing about my amazing past weekend! Yes, I was at Gene Winfield's. Yes, I learned a gazillion metalworking tips from a legend. Yes, I even did my very first burnout. Let me start at the beginning though... Early Saturday morning I stumble out of bed, grab a cup of coffee, and jump in Stude for the hour and a half drive up to Mojave, CA. My Dad makes the trek there from Vegas and we meet at Roadhouse Mikes - just the sort of greasy spoon you'd expect in a small desert town. With full bellies we head eight miles down the road to Gene Winfield's. We're signed up for Gene's bi-yearly metalworking workshop. By 9 o'clock Gene is busy acquainting all 10 participants with the various tools around his shop. Among the tools are a slip roll,  english wheel, beverly shears, pipe anvil, bead roller, and dozens of hammers, dollys, and dies. Soon Gene is fully absorbed into teaching us about various metals, chopping customs, gas welding, breaking an edge, and hammer forming metal. (You'll have to come back for how-to articles!)...

One of the most important things about TIG welding (I think I say that a lot - there must be a lot of important things!) is keeping things steady.  I've shot a video on keeping the filler steady so it doesn't get bumped into the tungsten and mess everything up, and now here's a video on using your hand as a sort of tripod to control your torch. I've used the writing analogy before, but here's another one: think about shooting a rifle.  You don't get a steady shot by holding the gun with both hands on the stock - the muzzle would be waving around and there would be almost no way to prevent some movement.  The best way to steady a rifle is to have some kind of support as close to the end of the muzzle as possible while still being able to fine tune your aim.  Think of a welding torch in the same way - support the torch as close to the cup as possible without burning yourself.  Of course, there will be compromises like visibility and pain.  But to produce a good weld,...

Everything you never wanted to know about Spark Plugs There's alot of info about spark plugs out there, the key is knowing who to trust! I've always relied on good'ole Pops to tell me what's what and after a little while I caught on. For a crash course (bad pun), look to Dallas Volk. Dallas is one of many-a-Volk who has a much sought after "red hat" meaning they've set a record over 200 mph at Bonneville an are life members of the 200 mph club. I want one. Do check out this tech about plugs and add your experience if you'd like, in a comment down below. Why Change your spark plugs? Replacing worn out spark plugs with new ones is important to restore engine power and efficiency by reducing misfires and burning more of the fuel in the cylinder. That extra efficiency can improve your fuel economy and as a bonus emissions are reduced. Choosing a plug: The first thing you want to look at when choosing a plug is your needs for your application. Plugs can range in price from $1.50 a plug for basic copper...

The best way I can explain what an exhaust system is to your car is its like how your car breathes. When I started driving my Studebaker three years ago, I knew the exhaust system would only be temporary. It was transplanted from a different model Studebaker and had been cut and pieced together to pseudo-fit into mine. But I just figured a pipe was a pipe and couldn't make too much difference. About six months ago the years of dragging my mufflers over any bump I passed payed off in a huge gaping hole in one of my mufflers! This is when I really began to get serious about redoing my exhaust system. Not only did the muffler have a hole, but the headers also looked like they had holes where the four tubes lead into the connector. Added to this, my header gaskets were blown, which led to more noise in an already noisy car and a general unhappiness of my engine. The problem with putting a new exhaust system onto Stude was that I didn't understand exhausts. How was I supposed to choose new headers, new...

When I wrote my 2010 Car Project Wish List, Get a new exhaust system on was top priority. I'm glad to report that this past week I tackled the first item on my list! I certainly can't take the credit on this one, because I had a lot of help! B&C Industries down in Anaheim put their skill and expertise to work in crafting a top quality custom exhaust system for Studebaker, along with tons of help from Matt over at Department of Customz also. As I'd previously explained Stude's exhaust: The pipes that went on my car were originally shaped for a different model Studebaker. This means I’ve got an ugly exhaust system taking a good 6” under my car’s profile – yuck! It’s also taken a good beating on the asphalt because of that, which has resulted in both mufflers been torn open! Take that and worn out Hooker headers and you’ve got crazy noise and a less-than-healthy exhaust system. "Less-than-healthy" is an understatement. We're talking nearly-unbearable noise, exhaust fumes pouring into the passenger area, and a slight embarrassment anytime I drove anywhere "car people" would be....

This is a short little video on keeping things steady when you're tig welding... specifically the filler rod.  A new rod is 3' long and quite floppy when you're holding it at one end, so I thought this little tip may help at least someone keep that filler rod steady....

Found a website called "Auto Fetish Details" and got to talking with the owner/operator (and I think also Janitor like me) about sharing some content. I've recently learned through another member and Ford Falcon wagon nut "Jsev" that detailing a car can make a near unbelievable difference in the paint, under the hood and interior. These guys are like magicians and are willing to do the hard work for you or give you the tips to do it yourself.  So check out the links below. There are alot of  "Before and After" pictures that'll let you judge for yourself. For other pictures of rides detailed to perfection, check out this link: Auto Detailing Pictures Next, here's some Auto Detailing Tips Learn some professional auto detailing tips to make your life easier! See and read some insider tips of paint care from the car detailing expert Learn professional tips of interior detailing and interior cleaning Finally, some classic car car tips. What'd you think? Find some info you can use?  Please let us know in a comment...

Looking at this picture now, I can no longer imagine my original plans were to simply slap some seat covers on and call it a day. I changed my mind when I realized these ol' seats had been rat-infested and that the majority of my time spent with my car would be sitting in the driver’s seat! Making over my car's interior was one of the first jobs I tackled alone on my 1955 Studebaker. Whenever I open the door and sit on my plush and sturdy bench seat, I'm thankful that I took the time. This article is just one of an entire series focusing on how-to rebuild your car's interior yourself, next up will be Car Interior 103 - Auto Upholstery. Before we get to upholstering, let’s make sure you've got a good foundation to put that pretty new fabric on. Following the steps below will get ya ready to ride in style and comfort! 1.) Pull the seats out of your car. You can't very well work on those seats while they’re still inside the car! This job is easiest when you've got plenty of room...

Written by Jim McIlvaine Our cars are our pride and joy. We love them, cherish them and in some cases, treat them better than we treat ourselves. Realistically, we know the relationships we have with our beloved machines usually don’t last a lifetime. Our tastes may change or our family obligations may finally win out and we eventually part ways. Still, we’ll always have memories and often photos are a great way to re-live some of those special times. Unfortunately, our love for our vehicles is often blind. When we look through the viewfinder, all we see is our car and we often overlook some pretty glaring issues that are really detracting from our pride and joy. It doesn’t have to be this way! To help out, here are three easy tips, which will, regardless of what kind of camera you own, help you take better pictures of your ride. Tip #1: Location, Location, Location You’ve spent all weekend detailing your car and finally it's perfect for pictures. Next, you break out your camera and start snapping some shots, right? WRONG! Your car deserves better than that. Take a...

Happy 2010!! Now that the holidays are over, it's time to get down to business! And for Grease Girl that means giving you more of what I originally set out for...to help the beginning car person get involved in the garage! While I hope my Studebaker wish list will provide the topics for some great how-to articles over the coming months, I've got a few tech how-to's up my sleeve already. Next to mechanics, paint is priority for most. However its my opinion that interior is more important, particularly if its a daily driver. Far more hours are spent sitting on the inside than viewing the paint outside, right!?! So what better place to start this year off than with the very first job I tackled on my Studebaker - the interior! Get ready for a whole series of articles this month on redoing your classic car's interior. Before jumping in, I thought I'd start with a few tips from a pro. Luis Loyola was kind enough to have me over to his shop, Loyola Auto Interiors, and share with us some terrific expert advice. So sit down, relax,...

Ford Falcon 4-Speed Shifter How-to Video     Do your choices for how you build your own ride need to make sense? To everyone?   I'm sure there's more than a few people who'd say I'm nuts for putting a Dagenham 4-speed back into my 1963 Falcon Wagon project.  I hear you.  But, I've got my reasons.   The main reason is the fact my Falcon's a rare (or maybe odd's a better word) bird.  This long-roofed wonder's an original, 6 cylinder, bench seat, floor shift, 4 speed car.  I've found one other goofy-six-by-four on Fordsix.com but just one! I like that! (have you got one?)   The other big reason (no, friends that know me, it's not just cause I'm a cheap SOB) involves some great memories and even better, life-long friends.   The Dagenham four speed and shifter that I'm rebuilding here is from my dad's friend Brad Bradly or "Harry" as his friends know him. This shifter's from his 1963 "shop truck" Falcon Ranchero that he still owns.  That Ranchero's been built, raced, totaled, re-built, raced, modified, raced again, totaled again... you get the idea! Now,...

Optima Red or Yellow top? I bet you've got it wrong! If you missed the other stories about SEMA, then you didn't read how Optima Batteries brought up car and truck enthusiasts for a "round table" of sorts to find out what's happening with their customers.  Great idea, right? MyRideisMe.com, through Grease Girl and me, Pikesan, represented the hot rod and custom car crowd. Also strongly represented was the off-road, diesel towing/performance, drag racing and serious computer-audiofile segments. Why'd Optima do it? Cause they're serious about making batteries for enthusiasts. The showed me they care about their existing customers and want to earn more by selling a great product. On the first day, I learned about the "Optima Paradox." Red top or yellow top?  Ken, my expert technical guide, schooled me on how folks that need a yellow top see that it's more expensive and buy a red top instead. Understandable, but wrong. Optima's a premium product and costs more than a run of the mill wet battery. But, experience tells  you, or should, that getting the right parts for your ride, even if they're a little more money,...